RADIUS attribute from rfc2865

---

Termination-Action

This Attribute indicates what action the NAS should take when the
      specified service is completed.  It is only used in Access-Accept
      packets.A summary of the Termination-Action Attribute format is shown below.
   The fields are transmitted from left to right.

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Type      |    Length     |             Value
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
              Value (cont)         |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Type

      29 for Termination-Action.

   Length

      6

   Value

      The Value field is four octets.

       0      Default
       1      RADIUS-Request

      If the Value is set to RADIUS-Request, upon termination of the
      specified service the NAS MAY send a new Access-Request to the
      RADIUS server, including the State attribute if any.

        FreeRADIUS Vendor-Specific dictionary values:

                    0 - Default 
                    1 - RADIUS-Request 
            

---