RADIUS attribute from rfc2865

---

Port-Limit

This Attribute sets the maximum number of ports to be provided to
      the user by the NAS.  This Attribute MAY be sent by the server to
      the client in an Access-Accept packet.  It is intended for use in
      conjunction with Multilink PPP  or similar uses.  It MAY also
      be sent by the NAS to the server as a hint that that many ports
      are desired for use, but the server is not required to honor the
      hint.

   A summary of the Port-Limit Attribute format is shown below.  The
   fields are transmitted from left to right.0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Type      |    Length     |             Value
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
              Value (cont)         |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Type

      62 for Port-Limit.

   Length

      6

   Value

      The field is 4 octets, containing a 32-bit unsigned integer with
      the maximum number of ports this user should be allowed to connect
      to on the NAS.

---