RADIUS attribute from rfc3162

---

Framed-IPv6-Prefix

This Attribute indicates an IPv6 prefix (and corresponding route)
      to be configured for the user.  It MAY be used in Access-Accept
      packets, and can appear multiple times.  It MAY be used in an
      Access-Request packet as a hint by the NAS to the server that it
      would prefer these prefix(es), but the server is not required to
      honor the hint.  Since it is assumed that the NAS will plumb a
      route corresponding to the prefix, it is not necessary for the
      server to also send a Framed-IPv6-Route attribute for the same
      prefix.

   A summary of the Framed-IPv6-Prefix Attribute format is shown below.
   The fields are transmitted from left to right.

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Type      |    Length     |  Reserved     | Prefix-Length |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                                Prefix
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                                Prefix
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                                Prefix
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
                                Prefix                             |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Type

      97 for Framed-IPv6-Prefix

   Length

      At least 4 and no larger than 20.

   Reserved

      This field, which is reserved and MUST be present, is always set
      to zero.

   Prefix-Length

      The length of the prefix, in bits.  At least 0 and no larger than
      128.Prefix

      The Prefix field is up to 16 octets in length.  Bits outside of
      the Prefix-Length, if included, must be zero.

---